Wednesday, April 4, 2012
Thursday, March 8, 2012
Wednesday, March 7, 2012
Magnesium Lab
Materials
- tripod.
- two equal strips of Magnesium.
- scale.
- two batterys.
- bunsen burner.
- crucible.
- clay triangle.
- clips.
- lights.
- tripod.
- two equal strips of Magnesium.
- scale.
- two batterys.
- bunsen burner.
- crucible.
- clay triangle.
- clips.
- lights.
Safety Concerns
1) DON'T wear baggy clothes.
2) keep hair pulled back.
3) MUST wear goggles.
4) NO open toed shoes.
Procedure
1) cut two strips of Magnesium.
2) twist the two pierces togather.
3) mass the empty crucible.
4) zero it out and mass the crucible w/ Magnesium in.
5) remove the Magnesium.
6) put the crucible on the clay triangle on the tripod.
7) light the bunsen burner.
8) put the strips of Magnesium in the flame until it begins to light.
9) DON'T look into the light when the Magnesium lights.
10) look out corner and drop into the crucible.
11) let it cool off.
12) then after it has cooled off figure out the mass on the scale.
13) record the mass.
Data Collected
empty crucible - 22.04 Grams
unborned Magnesium - 0.06 Grams
burned Magnesium - 1.04 Grams
Errors
no errors known of.
Questions
1) weight of crucible - 22.04 Grams, mass of Magnesium - 0.06, after burning - 1.04.
2) it gave off heat so it would be exothermic.
3) it reacted from electricity.
4) Magnesium Oxide and Magnesium Nitrate.
5) Oxygen and Magnesium.
Kaitlyn Stolte
Sunday, February 12, 2012
Study Guide Advanced 1-3 (D)
Was having some Youtube issues so I am posting the answers. You can see the pictures in class tomorrow.
1. MnO2 2. trigonal bipyramidal, 90/120, sp3d, and nonpolar 3. show in class
4. trigonal pyramidal, 107.3, sp3, polar 5. silver chromate 6. show in class
7. sulfur dioxide 8. show in class 9. show in class
10. trigonal bipyramidal, 90/120, sp3d, polar 11. Copper (II) oxide 12 Diarsenic trioxide
13. octahedral, 90, sp3d2, nonpolar 14. Fe2(S2O3)3 15. Selenium Trioxide 16. Show in class 17. Niobium (III)Phoshpide 18. Mg(OH)2 19. Show in class 20. trigonal planar, 120, sp2, nonpolar 21. show in class 22. C 23. d 24. b 25. d 26. d 27. b 28. c 29. a 30. c 31. b
1. MnO2 2. trigonal bipyramidal, 90/120, sp3d, and nonpolar 3. show in class
4. trigonal pyramidal, 107.3, sp3, polar 5. silver chromate 6. show in class
7. sulfur dioxide 8. show in class 9. show in class
10. trigonal bipyramidal, 90/120, sp3d, polar 11. Copper (II) oxide 12 Diarsenic trioxide
13. octahedral, 90, sp3d2, nonpolar 14. Fe2(S2O3)3 15. Selenium Trioxide 16. Show in class 17. Niobium (III)Phoshpide 18. Mg(OH)2 19. Show in class 20. trigonal planar, 120, sp2, nonpolar 21. show in class 22. C 23. d 24. b 25. d 26. d 27. b 28. c 29. a 30. c 31. b
Study Guide 2-3 (C)
Was having some YouTube issues so I am posting the answers and will make sure you can see the pictures in class.
1. Iron (II) Phosphate 2. Will show in class 3. Carbon Tetrachloride 4. Sodium Bromide
5. Show pic in class Li+ O2- Chemical formula:Li2O 6. Pic in class bent, 104.5, sp3, polar
7. CF2 8. show in class 9. tetrasulfur tetranitride 10. MnO2 11. Show in class 12. pic in class, Al +3 S-2 chemical formula: Al2S3 13. pic in class, K+ Cl- Chemical formula :KCl 14. carbon monoxide
15. Potassium Hydroxide 16. BaCl2 17. pic in class, trigonal bipyramidal, 90/120, sp3d, polar
18. linear, 180, sp, nonpolar
19. D 20. D. 21. A 22. D 23. A 24. C 25. B 26. C 27. B 28. B
1. Iron (II) Phosphate 2. Will show in class 3. Carbon Tetrachloride 4. Sodium Bromide
5. Show pic in class Li+ O2- Chemical formula:Li2O 6. Pic in class bent, 104.5, sp3, polar
7. CF2 8. show in class 9. tetrasulfur tetranitride 10. MnO2 11. Show in class 12. pic in class, Al +3 S-2 chemical formula: Al2S3 13. pic in class, K+ Cl- Chemical formula :KCl 14. carbon monoxide
15. Potassium Hydroxide 16. BaCl2 17. pic in class, trigonal bipyramidal, 90/120, sp3d, polar
18. linear, 180, sp, nonpolar
19. D 20. D. 21. A 22. D 23. A 24. C 25. B 26. C 27. B 28. B
Thursday, January 19, 2012
magnesium lab
Jonie Meling
January 11, 2012
magnesium lab
safety precautions:
1. hair pulled back
2. no loose or baggy clothing
3. no open toed shoes
4. wear goggles
5. eye precaution
materials:
1.crucible
2.magnesium strips
3.tri-pod
4. tongs
5. stir stick
6.wires
7. batteries
8. strike
9.Bunsen burner
10. 5 ml of distilled water
procedure:
1.gather up all the supplies
2. put crucible on tri-pod over Bunsen Burner (see image)
3. put the magnesium strip in the crucible
4.light the Bunsen Burner
5.pit lid on crucible for 2 minutes
6. if not lit take off lid for 2 more minutes
7. still not lit take magnesium out and lite by hand (don't look directly at flame)
8. put the magnesium back in crucible
9.put the lid on and turn off the Bunsen Burner
10. let crucible cool then add the 5 ml of distilled water
11. stir
12. put the batter contraption together (see images) and see if the lights light up.
results/data:
1.crucible weighs 33.6 oz
2crucible before burning weighs 33.75 oz
3.crucible after burning weighs 33.75 oz
4.solution was conductive.
question and answer:
1. use the masses in the table to calculate the mass of the magnesium ribbon and the mass of the magnesium product. record these masses in the table.
2. what kind of energy was released by the reaction? What can you conclude about the products of this reaction?
3. How do you know that the magnesium metal reacts with certain components of the air?
you know because there was still some magnesium residue left in the crucible and when we mixed that with water it made the lights light up.
4. Magnesium reacts with both oxygen and nitrogen from the air at the high temperature of the crucible. Predict the binary formulas for both products. Write the names of these two compounds.
5. The product formed from magnesium and oxygen is white, and the product formed from magnesium and nitrogen is yellow. From you observations, which compound makes up most of the product.
nitrogen because when the magnesium was burning it was more yellow than white.
6. Did the magnesium compounds and water conduct and electric current? Do the results indicate whether or not the compounds are ionic?
yes it did conduct and electric current because it lite up the lights and no we can not determine if they are ionic or not.
7. If the magnesium last mass instead of gaining mass, what do you think was a possible source of the error?
i think a possible air was that we didn't get the measurements right or that the magnesium didn't get burnt as well as it should have.
8.The magnesium ion plays an important role in a person's biochemistry.Research the role of this electrolyte in your physical and mental health.� Is magnesium listed as a component in a multi-vitamin and mineral tablet?
9. research the use of Mg(OH)2 in everyday products. What is Mg(OH)2 commonly called in over-the-counter drugs?
It is put in water to make milk of magnesia and also relieves heart burn, sore stomach, and some side effects are nausea and cramping.
January 11, 2012
magnesium lab
safety precautions:
1. hair pulled back
2. no loose or baggy clothing
3. no open toed shoes
4. wear goggles
5. eye precaution
materials:
1.crucible
2.magnesium strips
3.tri-pod
4. tongs
5. stir stick
6.wires
7. batteries
8. strike
9.Bunsen burner
10. 5 ml of distilled water
procedure:
1.gather up all the supplies
2. put crucible on tri-pod over Bunsen Burner (see image)
3. put the magnesium strip in the crucible
4.light the Bunsen Burner
5.pit lid on crucible for 2 minutes
6. if not lit take off lid for 2 more minutes
7. still not lit take magnesium out and lite by hand (don't look directly at flame)
8. put the magnesium back in crucible
9.put the lid on and turn off the Bunsen Burner
10. let crucible cool then add the 5 ml of distilled water
11. stir
12. put the batter contraption together (see images) and see if the lights light up.
results/data:
1.crucible weighs 33.6 oz
2crucible before burning weighs 33.75 oz
3.crucible after burning weighs 33.75 oz
4.solution was conductive.
question and answer:
1. use the masses in the table to calculate the mass of the magnesium ribbon and the mass of the magnesium product. record these masses in the table.
2. what kind of energy was released by the reaction? What can you conclude about the products of this reaction?
3. How do you know that the magnesium metal reacts with certain components of the air?
you know because there was still some magnesium residue left in the crucible and when we mixed that with water it made the lights light up.
4. Magnesium reacts with both oxygen and nitrogen from the air at the high temperature of the crucible. Predict the binary formulas for both products. Write the names of these two compounds.
5. The product formed from magnesium and oxygen is white, and the product formed from magnesium and nitrogen is yellow. From you observations, which compound makes up most of the product.
nitrogen because when the magnesium was burning it was more yellow than white.
6. Did the magnesium compounds and water conduct and electric current? Do the results indicate whether or not the compounds are ionic?
yes it did conduct and electric current because it lite up the lights and no we can not determine if they are ionic or not.
7. If the magnesium last mass instead of gaining mass, what do you think was a possible source of the error?
i think a possible air was that we didn't get the measurements right or that the magnesium didn't get burnt as well as it should have.
8.The magnesium ion plays an important role in a person's biochemistry.Research the role of this electrolyte in your physical and mental health.� Is magnesium listed as a component in a multi-vitamin and mineral tablet?
9. research the use of Mg(OH)2 in everyday products. What is Mg(OH)2 commonly called in over-the-counter drugs?
It is put in water to make milk of magnesia and also relieves heart burn, sore stomach, and some side effects are nausea and cramping.
Wednesday, January 18, 2012
Mason's Magnesium Lab
Mason Schreck. 1-13-11
Magnesium Lab
Safety Concerns--
> refrain from wearing baggy clothing
> wear proper eye protection
> refrain from wearing open toed shoes
> for girls (and some guys) have your hair pulled back
> do not look at the burning magnesium once it ignites, becuase it emits a bright UV light
Materials--
-crucible
-bunsen burner
-tongs
-matches/striker/lighter
-magnesium wiring
-triangle holder
Procedure--
1.) Measure about two 2" strips of magnesium "wiring" and twist them together
2.) Get you bunsen burner lit, and burning well.
3.) Get your crucible sitting in the little triange holder thing.
4.) Let the magnesium heat for two minutes.
5.) If nothing happens after two minutes, you may take the magnesium out with tongs and put it directly into the flame, just be aware that once it ignites you can only look at it with your peripheral vision to get it back into the crucible.
Luke and I, we did all of the first three steps in order. But as we watched another group wait for two minutes and nothing happened we decided to just put our magnesium straight into the flame. The effect was almost immediate, and the magnesium light up like a star. Luke video-taped it for us to use in our respective blogs, and it will be listed below.
Results--
MASS
> Empty--21.82g
> w/ Magnesium--21.95
> after burn--21.96g
It left a conducive substance behind after it burned. We were able to light up the light bulbs without touching the circuits wiring ends together.
Analyze
1.) TABLE
Empty Crucible--21.82g
Crucible w/ Mg before heating--21.95g
Magnesium ribbon--.13g
Crucible w/ Mg after burn--21.96g
Mg products--.01g
2.) It was an exothermic reaction, becuase it gave off heat. That when the metal burnt, it burned off any pockets of oxygen in the magnesium, making it heavier.
3.) Because magnesium can be filled up with electrons fully by nitrogen and oxygen, depending on the amount of magnesium involved. And by depending on the color of the light when it burned.
4.) MgO and Mg2N2
5.) Magnesium and oxygen make up the majority of the remaining product.
6.) Yes it conducted an electric current, this shows that the compounds are ionic.
7.) That you didn't allow for two minutes to pass for oxygen to mix a lot into the crucible.
Real-World Chemistry
1.)Yes it is listed as a component in a multi-vitamin and mineral tablet.
2.)Mg(OH)2 = Magnesium Hydroxide
Magnesium Lab
Safety Concerns--
> refrain from wearing baggy clothing
> wear proper eye protection
> refrain from wearing open toed shoes
> for girls (and some guys) have your hair pulled back
> do not look at the burning magnesium once it ignites, becuase it emits a bright UV light
Materials--
-crucible
-bunsen burner
-tongs
-matches/striker/lighter
-magnesium wiring
-triangle holder
Procedure--
1.) Measure about two 2" strips of magnesium "wiring" and twist them together
2.) Get you bunsen burner lit, and burning well.
3.) Get your crucible sitting in the little triange holder thing.
4.) Let the magnesium heat for two minutes.
5.) If nothing happens after two minutes, you may take the magnesium out with tongs and put it directly into the flame, just be aware that once it ignites you can only look at it with your peripheral vision to get it back into the crucible.
Luke and I, we did all of the first three steps in order. But as we watched another group wait for two minutes and nothing happened we decided to just put our magnesium straight into the flame. The effect was almost immediate, and the magnesium light up like a star. Luke video-taped it for us to use in our respective blogs, and it will be listed below.
Results--
MASS
> Empty--21.82g
> w/ Magnesium--21.95
> after burn--21.96g
It left a conducive substance behind after it burned. We were able to light up the light bulbs without touching the circuits wiring ends together.
Analyze
1.) TABLE
Empty Crucible--21.82g
Crucible w/ Mg before heating--21.95g
Magnesium ribbon--.13g
Crucible w/ Mg after burn--21.96g
Mg products--.01g
2.) It was an exothermic reaction, becuase it gave off heat. That when the metal burnt, it burned off any pockets of oxygen in the magnesium, making it heavier.
3.) Because magnesium can be filled up with electrons fully by nitrogen and oxygen, depending on the amount of magnesium involved. And by depending on the color of the light when it burned.
4.) MgO and Mg2N2
5.) Magnesium and oxygen make up the majority of the remaining product.
6.) Yes it conducted an electric current, this shows that the compounds are ionic.
7.) That you didn't allow for two minutes to pass for oxygen to mix a lot into the crucible.
Real-World Chemistry
1.)Yes it is listed as a component in a multi-vitamin and mineral tablet.
2.)Mg(OH)2 = Magnesium Hydroxide
Brooke Maroon's Magnesium Lab 1.18.12
SAFETY:
* no baggy clothing/open toed shoes/long hair pulled back
* wear safety glasses
*do not look at the burning magnesium once it ignites, becuase it emits a bright UV light
MATERIALS:
-crucible
-bunsen burner
-tongs
-matches/striker/lighter
-magnesium wiring
-triangle holder
PROCEDURE:
1.) Measure two 2" strips of magnesium and twist them together
2.) Get you bunsen burner lit, with a good flame with the triangle blue
3.) Set your crucible in the triangle holder on top of the burner
4.) Let the magnesium heat for two minutes.
5.) If nothing happens after two minutes, you may take the magnesium out with tongs and put it directly into the flame,do not look at the flame when it lights & turns white. It can burn your eyes because of how bright it is.
Brooke, Jordan & I accidently dropped the first crucible & it broke because we were holding it wrong with the tongs. The second time we did it, nothing happened. We could not get it to light. The third and final time we did it, we did it correct. It lit very fast. I was looking at the bright light for a little while because I forgot that it could burn my eyes but I immediately looked away when I remembered.
RESULTS:
Mass of EMPTY crucible: .8485
With Magnesium .0040
Mass after on fire: 0.8515
* no baggy clothing/open toed shoes/long hair pulled back
* wear safety glasses
*do not look at the burning magnesium once it ignites, becuase it emits a bright UV light
MATERIALS:
-crucible
-bunsen burner
-tongs
-matches/striker/lighter
-magnesium wiring
-triangle holder
PROCEDURE:
1.) Measure two 2" strips of magnesium and twist them together
2.) Get you bunsen burner lit, with a good flame with the triangle blue
3.) Set your crucible in the triangle holder on top of the burner
4.) Let the magnesium heat for two minutes.
5.) If nothing happens after two minutes, you may take the magnesium out with tongs and put it directly into the flame,do not look at the flame when it lights & turns white. It can burn your eyes because of how bright it is.
Brooke, Jordan & I accidently dropped the first crucible & it broke because we were holding it wrong with the tongs. The second time we did it, nothing happened. We could not get it to light. The third and final time we did it, we did it correct. It lit very fast. I was looking at the bright light for a little while because I forgot that it could burn my eyes but I immediately looked away when I remembered.
RESULTS:
Mass of EMPTY crucible: .8485
With Magnesium .0040
Mass after on fire: 0.8515
Magnesium lab
Materials
Magnesium ribbon
Crucible
Ring stand & ring
Clay triangle
Laybratory bunner
Stirring rod
Crucible tongs
Centigram balance
100-ml beaker distilled water conductivity testers
The object of this lab is to observe the evidence of the chemical reaction. Then to acquire and analyze info that will enable you to decide if the compound has an ionic bond. Lastly to classify if the products is ionic or not ionic
Safety procedure
Wear your hair back in a pony tail
Goggle are to be worn
Wear shoes that cover ur toes
Do not wear baggy cloths.
Procedure
1: gather items
2: place the ring stand and ring on the laboratory burner
3: place clay triangle on ring stand
4: place the crucible on the clay triangle
5: light burner just so the flam is blue
6: place the magnesium strip in the crucible if it doesn't like u will gave to do it by hand. ( don't look into the light$
7: wait for the magnesium to stop burning and then weigh it ( the mass should drop
8: pour 5ml of distilled water into ur beaker and then stir for a minute
9: use the conductivity testers to see if it is conduct.
What kind of energy was released? An ionic energy.
Predict the binary formulas? MgO and MgN
What can you conclude about the product of this reaction? That it mixed with the oxygen and turned white
How do u know that the magnesium metal reacted with certain components in the air? By the color the light was or by what colors the lights should be
The magnesium reacted with both oxygen and nitrogen because of the color. Nitrogen gave of yellow witch u didn't really see and oxygen gave off white. So the reaction happened more with oxygen and magnesium than nitrogen and magnesium.
We had an problem in ours. We did not loss any mass nor did we gain any
Magnesium ribbon
Crucible
Ring stand & ring
Clay triangle
Laybratory bunner
Stirring rod
Crucible tongs
Centigram balance
100-ml beaker distilled water conductivity testers
The object of this lab is to observe the evidence of the chemical reaction. Then to acquire and analyze info that will enable you to decide if the compound has an ionic bond. Lastly to classify if the products is ionic or not ionic
Safety procedure
Wear your hair back in a pony tail
Goggle are to be worn
Wear shoes that cover ur toes
Do not wear baggy cloths.
Procedure
1: gather items
2: place the ring stand and ring on the laboratory burner
3: place clay triangle on ring stand
4: place the crucible on the clay triangle
5: light burner just so the flam is blue
6: place the magnesium strip in the crucible if it doesn't like u will gave to do it by hand. ( don't look into the light$
7: wait for the magnesium to stop burning and then weigh it ( the mass should drop
8: pour 5ml of distilled water into ur beaker and then stir for a minute
9: use the conductivity testers to see if it is conduct.
What kind of energy was released? An ionic energy.
Predict the binary formulas? MgO and MgN
What can you conclude about the product of this reaction? That it mixed with the oxygen and turned white
How do u know that the magnesium metal reacted with certain components in the air? By the color the light was or by what colors the lights should be
The magnesium reacted with both oxygen and nitrogen because of the color. Nitrogen gave of yellow witch u didn't really see and oxygen gave off white. So the reaction happened more with oxygen and magnesium than nitrogen and magnesium.
We had an problem in ours. We did not loss any mass nor did we gain any
Tuesday, January 17, 2012
Magnesium Lab
Materials: you need a Crucible, a strip of Magnesium, a striker or a lighter, a hair tie, tripod, tongs, stir rod, Bunsen burner, wires, batteries, 5 ml. of distilled water and Christmas lights.
Safety Concerns: hair pulled back , close toed shoes, and safety goggles, no baggie clothes, and don't look directly at the magnesium burning. (shown in picture 4 below)
Procedure: 1. Safety First. Then gather all of your supplies. You start the Bunsen burner put crucible on top in the triangle then let it sit for 2 minutes with the lid on.
2. If not lit after 2 minutes then take the Mg out of crucible and put it in the flame. Once lit on fire use peripheral vision to set it back in the crucible. Make sure you shut off the flame.
3. Wait for it to burn. (wait for crucible to cool and proceed with the lab shown in the picture 1 above.) After the crucible has cooled down put 5 ml. of H2O in the crucible and stick to ends of the wires in the crucible and stir. (shown in the picture 2 above)
Results/Data: Crucible mass: 33.62 oz.
Crucible mass with magnesium: 33.75 oz.
Crucible mass after magnesium burned: 33.75 oz.
(the solution was conductive)
Errors: Errors that could have been made was the scale did not get tared and set back to '0'.
1. 13 oz.
2. There was a lot of energy being released from the light that was given off and from the heat.
3. Because the Magnesium left a residue in the crucible from the oxygen and nitrogen in the air.
4. MgO Magnesium Oxide; Mg3N2 Magnesium Nitrate
5. Oxygen makes up most because the residue was white.
6. Yes it did create an electric current and yes it does provide information that it is ionic.
7. An error that could have been made was they didn't tare the scale.
1. Magnesium is found in multi-vitamins and mineral tablets.
2."Milk of Magnesium" its found in something like a tum, for heart burn.
Magnesium Lab
Materials
1:Crucible
2:Magnesium Strip
3:Tri-Pod
4:Tongs
5:Stir Stick
6:Wires
7:Batteries
8:Striker
9:Bunsen Burner
Safety Concerns
1:Saftey Goggles
2:Hair Tied Back
3:Closed Toed Shoes
4:No Baggy Clothes
5:Eye Protection Precautions
Procedure
See Video
(Heat for 2 minutes with lid on if strip does not light then physically light the strip with the flame)
Results/Data
Crusable Weight: 33.6 Oz.
Crusable Weight before burning: 33.75 Oz.
Crusable Weight after burning: 33.75 Oz.
*Solution was conductive*
Errors
The Crusable weighs the same both before and after burning.
Brooke's Magnesium Lab
Brooke Selvage
Magnesium Lab
1-17-11
Safety Concerns:
1. Wear safety goggles
2. Hair needs to be pulled back
3. No baggy clothes, especially sweatshirts
4. Closed toe shoes
5. Dont look straight into the burning magnesium,use your peripheral vison
6. Dont touch the hot crucible until it's cooled down completley, it gets very hot
Supplies/Materials for this lab:
1. Crucible
2. Ring stand
3. Triangle holder
4. Bunsen burner
5. Tongs
6. Matches or a lighter
7. 2 strips of wire
8. Electric balance
Procedure:
The very first thing you should do before you get started, is gather all your supplies that i listed above and have them all sitting out. Then you should cut 2 strips of magnesium, about 2 inches each. Then twist them together/intertwine them. Then you should weigh the crucible alone, then with the magnesium strips in it, and write those two down. After all that is done, set the crucible on the clay triangle holder. Once its on that turn the gas on so the flame is about 3 inches high, then light it. Once you light it hurry and set it in the crucible. When it starts to burn do not look directly at the light, look at it at the corner of your eye as the light is very dangerous. Once the magnesium is all burned, you can turn the gas off. Most likely the crucible will be very hot, so let it sit there and cool down for a bit, then grab the tongs and remove it off the triangle holder and place it on the electric balance and take the new mass of it and record it.
My Results:
Mass of EMPTY crucible: .8485
With Magnesium .0040
Mass after on fire: 0.8515
Questions:
1. Already done ^
2. Magnesium Nitrate
3. I know that the magnesium reacts with certain components of the air because of how it reacted and ignited, from the oxygen and nitrogen in the air.
4. Not sure?
5. I think the product that makes most of the light up is the magnesium.
6. I don't think that the compounds are ionic.
7. Possible source of error: Oxygen.
Real World Chemistry questions:
1. Yes
2. Magnesium Oxide is commonly used for heartburn and sore stomach, as far as over the counter drug.
Magnesium Lab
1-17-11
Safety Concerns:
1. Wear safety goggles
2. Hair needs to be pulled back
3. No baggy clothes, especially sweatshirts
4. Closed toe shoes
5. Dont look straight into the burning magnesium,use your peripheral vison
6. Dont touch the hot crucible until it's cooled down completley, it gets very hot
Supplies/Materials for this lab:
1. Crucible
2. Ring stand
3. Triangle holder
4. Bunsen burner
5. Tongs
6. Matches or a lighter
7. 2 strips of wire
8. Electric balance
Procedure:
The very first thing you should do before you get started, is gather all your supplies that i listed above and have them all sitting out. Then you should cut 2 strips of magnesium, about 2 inches each. Then twist them together/intertwine them. Then you should weigh the crucible alone, then with the magnesium strips in it, and write those two down. After all that is done, set the crucible on the clay triangle holder. Once its on that turn the gas on so the flame is about 3 inches high, then light it. Once you light it hurry and set it in the crucible. When it starts to burn do not look directly at the light, look at it at the corner of your eye as the light is very dangerous. Once the magnesium is all burned, you can turn the gas off. Most likely the crucible will be very hot, so let it sit there and cool down for a bit, then grab the tongs and remove it off the triangle holder and place it on the electric balance and take the new mass of it and record it.
My Results:
Mass of EMPTY crucible: .8485
With Magnesium .0040
Mass after on fire: 0.8515
Questions:
1. Already done ^
2. Magnesium Nitrate
3. I know that the magnesium reacts with certain components of the air because of how it reacted and ignited, from the oxygen and nitrogen in the air.
4. Not sure?
5. I think the product that makes most of the light up is the magnesium.
6. I don't think that the compounds are ionic.
7. Possible source of error: Oxygen.
Real World Chemistry questions:
1. Yes
2. Magnesium Oxide is commonly used for heartburn and sore stomach, as far as over the counter drug.
Subscribe to:
Posts (Atom)







